My brand new pouch design, I imagine unlike anything already seen. Believe it or not, a lot of thought has gone into this design to make a pouch that is as un-obstructive as possible when shooting an OTT style catapult.
Accuracy always comes down to the shooter, but there are things we can use and do to make accuracy easier, consistent, and more repeatable. This is why I have designed this pouch. Regular pouches generally maintain their width all the way to to the band holes, or they taper down slightly. All of that pouch material needs, or should pass over the fork tips cleanly without obstruction; not always easy with a wider pouch. The bullet pouch is made up of a 25mm circle which holds just the ball, then the side tabs basically become an extension of the band. These tabs are able to pass over the fork tips much easier and cleaner due to them being thinner, there’s no excess pouch material in the way. This also gives a much better feel and balance of holding the ball.
A cleaner pass over the forks, means improved consistent accuracy due to their being no obstruction to the pouch as it passes over the fork tips, leaving the centre of the pouch to cleanly pass through the cup of the catapult. Couple this pouch with a straight wrist shooting style and your band flight becomes as clean and un-obstructed as it is with a TTF set up.
The centre hole is 5mm, and outer holes remain at 5mm, the same as the Zeppelin. The tabs increase from 13mm at the band hole, to 15mm at the attachment, this helps to dissipate the pressure evenly and avoid any possible weak spots.
Made with 2mm luxury red / black superfibre, these pouches are of the best material available, completely non-stretch and re-useable time and time again.
These have been extensively field tested with excellent results, and many reports of noticeable improvement in consistent accuracy. These aren’t a magic fix for accuracy, you still need to do everything right, but these will certainly help consistent accuracy at a higher level, and aid in accuracy while learning.
Suits 9 – 11mm ammunition, but 12mm can be used at a push.
Width 25mm at the widest point.