EVO© Field Pro ‘Leather Case’

£72.95

The ‘EVO Field Pro’ really does no longer require an introduction, but…this is the sister version of the hugely popular Goblet EVO, the only difference being that this one is clipped, so no more wrap and tuck…unless you prefer that of course, which some do, then the regular Goblet EVO will be the one for you.

This catapult is an absolute dream to shoot. It’s made from 304 Stainless steel, so will last lifetimes. There are no rivnuts, the clips themselves are threaded. T20 A2 stainless Torx bolts secure the clips in place. Torx fittings being far more sturdy than the Alan key fittings that can round off easily. Torx key supplied. In my opinion the Goblet EVO is the perfect hunting catapult. Weighing in around 300grams, it easily absorbs recoil. The sloped tips enable you to use a straight wrist shooting style, while the gnarly grip and chamfered brace give a feeling of stability and security in the hand. It’s slimline nature, being only 10mm thick, allows it to fit into any pocket comfortably.

Width 95mm
Length 135mm
Tips 25mm
Measurements are approximate

PLEASE READ THE FOLLOWING…

When you receive the catapult, take care to disassemble it and de-grease it. You can oil or grease the bolt threads to keep things moving nicely. Included in the case are a set of springs, these locate under the torx bolts and can be used to give a sprung loaded clip if you want to. I personally don’t because I worry about pinging one off and losing it.

Securely fasten the band in the clips and pull the elastic back a few times, away from the face initially, just in case. I have thoroughly tested these with a heavy set up and have had no slippage or damage to any band, but you never know! If you do experience wear on the bands, check the fork tip and clip for a rough edge, and a bit of a rub with sandpaper will cure this should it arise.

As with all of our products we accept no responsibility or liability for injury or damage to yourself, any third parties, property or other, as according to our terms and conditions.

Comes in a beautiful leather catapult case for those that prefer the more traditional look and feel of catapult shooting. These have a real sense of quality, and prestige with the picturesque game scene embossed on the front, featuring two Pheasants and a Rabbit, and of course, the small Catty Shack logo.

Made from the best quality, 2mm thick, top grain (the most expensive) vegetable tanned leather. Please be aware that as leather is a naturally occurring product, colour and texture will alter slightly from case to case, but it is not a dramatic difference. The leather may feel a little stiff when you first receive it, but it will become more supple over time as the leather breaks in.

There is a small pocket on the right hand side of the case to accept a key, for slingshots that have Alan key, or Torx key clip fittings. The pocket will accept keys up to 4mm wide, and 10cm long. Initially the pocket may be a little tight, but this is to allow the leather to stretch a little, but still remain a good fit over time.

These cases will fit any of the Catty Shack range of EVO’s, and also the soon to be released HGH.

Catapult can be stored and carried inside the case with bands attached.

Comes with spare poppers.

Dimensions;
Height 15.5cm
Width 13.cm

In stock

Description

The ‘EVO Field Pro’ really does no longer require an introduction, but…this is the sister version of the hugely popular Goblet EVO, the only difference being that this one is clipped, so no more wrap and tuck…unless you prefer that of course, which some do, then the regular Goblet EVO will be the one for you.

This catapult is an absolute dream to shoot. It’s made from 304 Stainless steel, so will last lifetimes. There are no rivnuts, the clips themselves are threaded. T20 A2 stainless Torx bolts secure the clips in place. Torx fittings being far more sturdy than the Alan key fittings that can round off easily. Torx key supplied. In my opinion the Goblet EVO is the perfect hunting catapult. Weighing in around 300grams, it easily absorbs recoil. The sloped tips enable you to use a straight wrist shooting style, while the gnarly grip and chamfered brace give a feeling of stability and security in the hand. It’s slimline nature, being only 10mm thick, allows it to fit into any pocket comfortably.

Width 95mm
Length 135mm
Tips 25mm
Measurements are approximate

PLEASE READ THE FOLLOWING…

When you receive the catapult, take care to disassemble it and de-grease it. You can oil or grease the bolt threads to keep things moving nicely. Included in the case are a set of springs, these locate under the torx bolts and can be used to give a sprung loaded clip if you want to. I personally don’t because I worry about pinging one off and losing it.

Securely fasten the band in the clips and pull the elastic back a few times, away from the face initially, just in case. I have thoroughly tested these with a heavy set up and have had no slippage or damage to any band, but you never know! If you do experience wear on the bands, check the fork tip and clip for a rough edge, and a bit of a rub with sandpaper will cure this should it arise.

As with all of our products we accept no responsibility or liability for injury or damage to yourself, any third parties, property or other, as according to our terms and conditions.

Comes in a beautiful leather catapult case for those that prefer the more traditional look and feel of catapult shooting. These have a real sense of quality, and prestige with the picturesque game scene embossed on the front, featuring two Pheasants and a Rabbit, and of course, the small Catty Shack logo.

Made from the best quality, 2mm thick, top grain (the most expensive) vegetable tanned leather. Please be aware that as leather is a naturally occurring product, colour and texture will alter slightly from case to case, but it is not a dramatic difference. The leather may feel a little stiff when you first receive it, but it will become more supple over time as the leather breaks in.

There is a small pocket on the right hand side of the case to accept a key, for slingshots that have Alan key, or Torx key clip fittings. The pocket will accept keys up to 4mm wide, and 10cm long. Initially the pocket may be a little tight, but this is to allow the leather to stretch a little, but still remain a good fit over time.

These cases will fit any of the Catty Shack range of EVO’s, and also the soon to be released HGH.

Catapult can be stored and carried inside the case with bands attached.

Comes with spare poppers.

Dimensions;
Height 15.5cm
Width 13.cm

Additional information

Weight 600 g
Dimensions 16 × 15 × 5 cm

Reviews

There are no reviews yet.

Be the first to review “EVO© Field Pro ‘Leather Case’”

Your email address will not be published. Required fields are marked *

Copyright © 2020 Catty Shack Ltd. All Rights Reserved.